The aim of this study was to determine the influence from the recovering time on the dimensional stability of polydimethylsiloxane (Speedex, Coltène/Whaledent Company, Altstätten, Switzerland) prior to type IV dental stone pouring. The double impression technique was utilized with uniform spacing of 1 mm for the wash paste, at 30 minutes, 24 hours and 72 hours after making the impression using an individual perforated metal tray. After the preparation of the impressions, six stone models were made by the standard procedure for all the impressions. The dimensional alterations (mm) of the models obtained were submitted to analysis of variance (ANOVA) and Tukey's test (α = 0.05). No statistically significant difference between the three groups (30 minutes, 24 hours and 72 hours) were recorded for either the height or diameter of the samples. However, upon comparing the results of the three groups with the metal standard model, there was a significant difference between group 1 (30 min) in relation to the diameter of the standard metal die (p = 0,047). The condensation silicone Speedex shows satisfactory dimensional stability, where dental stone models can be poured with assurance up to 72 hours after preparation of the impression.

OBJECTIVES: To evaluate the effect of a chewing exercise on pain intensity and pressure-pain threshold in patients with myofascial pain. METHODS: Twenty-nine consecutive women diagnosed with myofascial pain (MFP) according to the Research Diagnostic Criteria comprised the experimental group and 15 healthy age-matched female were used as controls. Subjects were asked to chew a gum stick for 9 min and to stay at rest for another 9 min afterwards. Pain intensity was rated on a visual analog scale (VAS) every 3 min. At 0, 9 and 18 min, the pressure-pain threshold (PPT) was measured bilaterally on the masseter and the anterior, medium, and posterior temporalis muscles. RESULTS: Patients with myofascial pain reported increase (76%) and no change (24%) on the pain intensity measured with the VAS. A reduction of the PPT at all muscular sites after the exercise and a non-significant recovery after rest were also observed. CONCLUSION: The following conclusions can be drawn: 1. there are at least two subtypes of patients with myofascial pain that respond differently to experimental chewing; 2. the chewing protocol had an adequate discriminative ability in distinguishing patients with myofascial pain from healthy controls.

INTRODUÇÃO: Os sistemas de núcleos intra-radiculares estéticos foram recentemente introduzidos no mercado. Não existem muitos trabalhos na literatura comparando seu comportamento em relação aos sistemas de pinos metálicos convencionais quando submetidos à testes com carga cíclica. OBJETIVOS: este estudo comparou a taxa de sobrevivência, resistência à fratura e modo de fratura de dentes tratados endodonticamente reconstruídos com sistemas de núcleos intra-radiculares metálicos convencionais e estéticos, restaurados com coroas de porcelana pura e submetidos à carga cíclica. MATERIAIS E MÉTODOS: trinta caninos tiveram as coroas removidas 1,5mm acima da junção cemento-esmalte e preparados para coroa de porcelana pura deixando 1,5mm de dentina acima do término do preparo. Os dentes foram distribuídos em 3 grupos de 10. O grupo 1 foi restaurado com pinos de cerâmica de zircônia e núcleos de preenchimento em cerâmica vítrea termo-injetada. O grupo 2 foi restaurado com pinos de resina composta reforçada por fibra de vidro e o grupo 3 com pinos de titânio. Nos grupos 2 e 3 foi usada resina composta reforçada com fibra de vidro como material para núcleo de preenchimento; os dentes foram restaurados com coroas totais e tanto os pinos quanto as coroas de porcelana foram cimentados com um sistema de cimentação resinosa de polimerização dupla. Os espécimes foram incluídos em resina acrílica e submetidos à uma carga de 250N por 500,000 ciclos, numa freqüência de 1,7Hz sendo em seguida submetidos à carga estática em uma máqina de testes universal até a falha. Os dados foram analisados estatisticamente com os testes ANOVA a 1 critério e Exato de Fischer (alfa=.05). RESULTADOS: a taxa de sobrevivência foi de 100%; os valores de resistência à fratura em N (DP) foram: grupo 1 = 886,50(170,6), grupo 2 = 762,2(113,6) e grupo 3 = 768,9(72,9). Não houve diferença estatística de resistência à fratura entre os grupos (P=0.08). O percentual de modo de fratura favorável encontrado foi: grupo 1 = 60%; grupo 2 = 90% e grupo 3 = 50%. Não houve correlação entre o tipo de pino e modo de fratura (P=0.142). CONCLUSÃO: dentes restaurados com sistemas de núcleos intra-radiculares estéticos e coroas totais de porcelana tiveram as mesmas taxas de sobrevivência, valores de resistência à fratura e modo de fratura que os metálicos convencionais diretos após aplicação de carga cíclica.

INTRODUCTION: Esthetic post and core systems were recently introduced. There are few reports regarding their behavior under cyclic loading. OBJECTIVES: This study compared the effect of cyclic loading on survival rate, residual strength and mode of fracture of endodontically treated teeth restored with esthetic and direct metallic post systems subjected to mechanical cyclic loading. MATERIALS AND METHODS: Thirty canines were endodontically treated, decoronated and prepared for metal free ceramic crowns, leaving 1.5 mm of dentin for ferrule effect. They were distributed in 3 groups and restored as follows: group 1 with zirconia posts (Cosmopost) and glass-ceramic cores (IPS Empress Cosmopost); group 2 with fiber reinforced composite posts (FibreKor) and group 3 with titanium posts (AZthec Anchor). Direct resin composite (Build It FR Resin Composite) was used as core in groups 2 and 3. All specimens were restored with all ceramic crowns (IPS Empress 2). A resin cement/adhesive system (Cement It/Bond It Primer A+B) was used to lute the posts to root canals and metal free porcelain crowns to the teeth preparation. Specimens were subjected to mechanical load of 250 N for 500,000x at a frequency of 1.7 Hz and then to static load until failure in a universal testing machine. Data were analyzed using One-way ANOVA and Fischer Exact tests alpha=0.05. RESULTS: All groups had 100% survival rate after cyclic loading; fracture strength values (SD) in N were: group 1 = 886.5(170.6), group 2 = 762.2(113.6) and group 3 = 768.9(72.9); there was no difference among groups (p=0.08); the percentage of mode of favorable fracture found was: group 1 = 60%, group 2 = 90% and group 3 = 50%; there was no correlation between the mode of failure and post and core system used (P=0.142). CONCLUSIONS: Esthetic post and core systems showed statistically equivalent fracture strength values, mode of failure and survival rate compared to conventional direct metallic post and resin composite core system after cyclic loading.